Installing The Rechargeable Battery Pack Into The Handset; Figure 8-27 Opening The Dtr-1R-2 Battery Cover; Figure 8-28 Remove The Battery Case Cover - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5.2
8 - 24

Figure 8-27 Opening the DTR-1R-2 Battery Cover

Installing the Rechargeable Battery Pack into the Handset

The handset is powered by a rechargeable battery pack. The battery
recharges automatically when the handset is placed in the base unit. To
maximize the charge capacity of your battery pack, DO NOT plug the
telephone cord into the base unit and wall jack until the battery is fully
charged.
1. Press down on the handset battery case cover (use the finger indention
for a better grip) and slide the cover downward to remove.

Figure 8-28 Remove the Battery Case Cover

UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Cordless Telephones