Figure 12-22 Removing The Button Set From A Multiline Terminal; Figure 12-23 Inserting A New Button Set Into A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
S 8 I
ECTION NSTALLING A
The BS( )-R Unit button set can be installed on a Multiline Terminal to accommodate
French and Spanish languages. The keypad provides the appropriate language
designations.
1.
2.
3.
4.
12 - 18
B S
UTTON
Remove the plastic cover. (Refer to paragraph
on page 12-16.)
Pull up on the tab and lift the button pad away from the telephone to remove the
existing button.

Figure 12-22 Removing the Button Set from a Multiline Terminal

Slide the new button set into the grooves located on the inside of the telephone,
then press down on the button set to snap it into place.

Figure 12-23 Inserting a New Button Set into a Multiline Terminal

Insert the line card and plastic panel on the Multiline Terminal.
M
ET ON A ULTILINE
UNIVERGE SV8100/SV8300
T
ERMINAL
6.2 Removing the Plastic Panel
term
Installing D Series i Telephones