Installation - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
6 - 18
Voice Mail Server (voice mail requires a compact flash card)
SIP Server
RTP Forwarding
VoCoder Conversion
3.1.2

Installation

Each SV8100 system must have the CD-CP00-US installed in Slot
1 of the Controlling Chassis.
1. Install the battery on the CD-CP00-US. The polarity "+" symbol
must be on top as illustrated in
Battery
IMPORTANT INSTALLATION NOTES
The chassis power must be off when installing or
removing the CD-CP00-US.
After removing a previously installed
CD-CP00-US, handle the blade, carefully, from
the edges. If certain solder points/resistors are
touched on the back of the blade, some RAM/
temporary memory may be lost (e.g., time, date,
user-defined settings, etc.)
Installation.
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
Figure 6-5 CD-CP00-US