UNIVERGE SV8100/SV8300
System Hardware Manual
3.5.8
Install AC Power Cords on Multiple-Chassis (Optional)
1.
Locate the supplied AC power cords and attach to the AC Inlets
located on the back of the Controlling and Expansion Chassis.
Figure 4-46 Install 19" AC Power Cords (Multiple-Chassis)
3.5.9
Install Additional Blades
Refer to Chapter 5,
6-3.
3.5.10
Apply Power to the 19" Chassis
Refer to Chapter 5,
2.1 Installation and Safety Precautions on page
2.6 Powering Up the SV8100 on page
Issue 1.0
AC Power
Cords to
AC Inlets
6-8.
4 - 41