UNIVERGE SV8100/SV8300
System Hardware Manual
Repeat for additional chassis mounting.
Figure 5-35 Rack Mount Bracket Installed 19" CHS1U-US Chassis
Figure 5-36 Rack Mount Bracket Installed 19" CHS2U-US Chassis
4.
Carefully slide the chassis into desired location within the rack. Make
sure the hooks on the mounting bracket are inserted into the back of the
chassis, securing it in place. Note that the cabling is run through the front
of the rack for ease of access.
5.
Secure the brackets to the rack using the screws supplied.
Each CHS1U-US chassis will require
approximately 1.75" of height within the rack.
Each CHS2U-US chassis will require
approximately 3.5" of height within the rack.
Issue 1.0
5 - 33