UNIVERGE SV8100/SV8300
System Hardware Manual
5.2.2
Install Cooling Fan
1.
Align replacement fan with holes and secure with two screws
(refer to
5-76.
2.
Install cabling into retention clips (refer to
Access Panel Removed on page
3.
Insert access panel hinges into slots on rear of chassis.
4.
Plug fan power cable into three prong plug (refer to
5-104 Opening Chassis Access Panel (CHS2U-US Chassis)
on page
5.
Reinstall access cover and secure with retaining screw (refer to
Figure 5-103 CHS2U-US Chassis Access Panel on page
Figure 5-105 Chassis Access Panel Removed on page
5-76).
Issue 1.0
Figure 5-105 Chassis
5-76).
Figure
5-75).
5 - 77