Figure 12-36 Removing The Multiline Terminal; Figure 12-37 Wall Mounting Base Plate On Switch Box - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
12 - 26
11.1.3 Removing the Wall Mounted Multiline Terminal from the Base Plate
To remove the Multiline Terminal, press the tabs at the bottom as
shown in Figure 12-36 Removing the Multiline
on the Telephone until it comes loose.

Figure 12-36 Removing the Multiline Terminal

11.1.4 Wall Mounting the Base Plate on a Switch Box
1. Locate the screw holes on the base cover and hang the cover
over the screws on the switch box as illustrated in
Wall Mounting Base Plate on Switch

Figure 12-37 Wall Mounting Base Plate on Switch Box

UNIVERGE SV8100/SV8300
Terminal, and push up
Box.
term
Installing D Series i Telephones
Figure 12-37