Figure 5-44 Installing Pz-Bs10 Blade In Expansion Bay; Figure 5-45 Pz-Bs10 Blade Installed; Figure 5-46 Pz-Bs10 Installed (Cover Closed) - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 40
6. Slide the PZ-BS10 blade into the chassis until
resistance (back plane) is felt.

Figure 5-44 Installing PZ-BS10 Blade in Expansion Bay

7. Gently push until the blade seats and install the
supplied retaining screw.
8. Align the door with the hinge and reattach the door.

Figure 5-45 PZ-BS10 Blade Installed

9. Close the PZ-BS10 cover.

Figure 5-46 PZ-BS10 Installed (Cover Closed)

UNIVERGE SV8100/SV8300
Screw Hinge
Installing the SV8300 Chassis