Unmanaged Switch Functions; Led Indications; Connectors; Table 6-61 Cd-Etia Led Indications - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
6 - 120
2. User removes Add-on board and moves it to slot 6.
3. User relocates the Main board to slot 4.
The grouping of the three GSWU units to form a 20 port
switch is restricted to reside in a single system location. The
grouping is not allowed where the GSWU units are placed
as part of the NetLink feature in the Univerge SV8100
system.
6.5.2.5

Unmanaged Switch Functions

In the unmanaged mode, a GSWU unit will have the
following functions only:
6.5.3

LED Indications

1000Mbps Link
10/100Mbps Link
No Link
Port Activity
6.5.4

Connectors

Backplane Connector – J1 connection to system CPU board and
other boards in the chassis.
The re-inserted board automatically gets ports
17 ~ 24 (9 ~ 16 are unavailable).
User can erase the ports 9 ~ 16.
Then reinsert the board in slot 6 to get ports 9 ~ 16.
None of the port numbers change. However, the
programming in Program 10-55 must be changed to
reflect this move.
10/100/1000 Ethernet ports (x8)
PoE Class 3 (lowest power class)

Table 6-61 CD-ETIA LED Indications

Port State
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
LED Display
Green Solid
Yellow Solid
Off
LED Blinking

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Univerge sv8300

Table of Contents