Issue 1.0
4 - 66
6.1.2
Install Cooling Fan
1.
Align replacement fan with holes and secure with two screws
(refer to
4-65.
2.
Install cabling into retention clips (refer to
Access Panel Removed on page 4-65
3.
Insert access panel hinges into slots on rear of chassis.
4.
Plug fan power cable into three prong plug (refer to
Opening Chassis Access Panel (19" Chassis) on page
5.
Reinstall access cover and secure with retaining screw (refer to
Figure 4-79 19" Chassis Access Panel on page
Figure 4-81 Chassis Access Panel Removed on page
UNIVERGE SV8100/SV8300
Figure 4-81 Chassis
Figure 4-80
4-64).
Installing the SV8100 Chassis
4-65).