Figure 13-19 Ct(A)-R Unit; Figure 13-20 Connecting A Multiline Terminal To A Pc Using A Ct(A)-R Unit (Example) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.4
ETU

Figure 13-20 Connecting a Multiline Terminal to a PC using a CT(A)-R Unit (Example)

System Hardware Manual
CT(A)-R Unit (Computer Telephony Adapter)
The Computer Telephony Adapter, CT(A)-R Unit allows a Multiline Terminal to
be connected to a PC. The PC can perform all Multiline Terminal functions
using a TAPI-compatible application software (Microsoft Telephony
Application Programming Interface).
The Multiline Terminal must be located within five feet (1.5 m) of the PC. An
AC-2R/AC-3R Unit is necessary.
Figure 13-20 Connecting a Multiline Terminal to a PC using a CT(A)-R Unit
(Example) shows how the CT(A)-R Unit is connected to the ESI(8)-U( ) ETU
and to the PC. The required AC-2R/AC-3R Unit adapter is not shown.
Multiline Terminal + CT(A)-R Unit
ESI
Line Cord (2-line)

Figure 13-19 CT(A)-R Unit

RS-232C Cable (Straight)
CT(A)-R Unit
[CT(A)-R Unit: D-sub9 Male Pin]
Optional Headset
Issue 1.0
PC
13 - 19