Outside Line Types - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
6.4
System Hardware Manual
Operating Humidity: 10 ~ 90% RH (non-condensing)
Recommended Long Term Humidity: 10 ~ 90% RH
PZ-BS10
Blades –
CD-16DLCA
Operating Temperature: +32°F ~ +104
Recommended Long Term Temperature: -4°F ~ +140°F (-20°C ~ 60°C)
Humidity: 10 ~ 90% RH (non-condensing)
Recommended Long Term Humidity: 10 ~ 90% RH
CD-4LCA
Blades -
PZ-4COTF
,
Operating Temperature: +32°F ~ +104°F (0°C ~ 40°C)
Recommended Long Term Temperature: -4°F ~ +140°F (-20°C ~
60°C)
Operating Humidity: 10 ~ 90% RH (non-condensing)
Recommended Long Term Humidity: 20 ~ 90% RH
Door Box
Operating Temperature: -4°F ~ +104
Operating Humidity: 20 ~ 80% (non-condensing)
SV8100 Power Supply –
Operating Temperature: +32°F ~ +104°F (0
Recommended Long Term Temperature: -4°F ~ 167
Operating Humidity: 20 ~ 95% RH (non-condensing)
Recommended Long Term Humidity: 10 ~ 95% RH

Outside Line Types

The following outside lines can be used with the UNIVERGE SV8100/SV8300
system.
2-wire, Loop Start or Ground Start Trunks – SV8300 only
2-wire, 2-way DID Lines (Dial Pulse or DTMF) – SV8300 only
DID feature is not available for Europe and Australia market.
4-wire, E&M Tie Lines (Type I or V, Dial Pulse, or DTMF)
Digital Trunk T1/FT1 (Loop Start, Ground Start, Tie Line (E&M), or DID
Signaling)
ISDN-BRI Trunks
ISDN-PRI Trunks
PZ-BS11 PZ-VM21
, ,
PZ-8DLCB
,
PZ-4LCA CD-8LCA
, ,
CD-PRTA
MPS7101
PZ-ME50 CD-8DLCA
, ,
o o o
F (0 C ~ 40 C)
PZ-8LCE CD-4COTB
, ,
o o o
F (-20 C ~ 60 C
o o
C ~ +40 C)
o o
F (-40 C ~ 75
Issue 1.0
,
,
o
C)
2 - 31