NEC Univerge SV8100 System Hardware Manual page 328

Issue 1.0
6 - 16
USB Interface Circuit
Ethernet Interface Circuit
PZ-BS10/PZ-BS11 Interface Circuit
Main Processing 32-Bit CPU Circuit (MPC8260 @ 2
Time Switch, Optional Blade Control Circuit
Backboard Interface Circuit
The CD-CP00-US provides:
200 trunk ports maximum
512 extension ports maximum
– 512 ports digital/IP extensions maximum
– 256 analog ports maximum
256 virtual extensions
Connection for PZ-32IPLA/PZ-64IPLA/PZ-128IPLA Daughter Board
Connection for PZ-VM21 Daughter Board
Connection for Expanded Memory (PZ-ME50)
Supports TAPI 2.x
One Green Status LED
Four Red Status LEDs
Five diagnostic LEDs which indicate the status of various system
functions
During normal operation, the "RUN" LED will be flashing and the
remaining LEDs are off
Time Division Multiplex Switch (TDM Switch)
Digital Phase Locked Loop (DPLL)
Tone Generator
Tone Processing DSP
Connection for Memory Module
DSP
DTMF Tone Sender
DTMF Tone Receiver
DTG
32 Tone Resources (for DTMF Receiver, Caller ID Receiver, and Call
Progress Tone Detection)
System Tone Sender
MF Receiver
UNIVERGE SV8100/SV8300
66
Installing the SV8100/SV8300 Blades
MHz)