Figure 12-30 Removing The Cutout; Figure 12-31 Bundling The Line Cord - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
11.1.2 Wall Mounting the Telephone
1. Extend and remove the base cover from the telephone. Refer
to Section 10 Removing or Installing the Base Plate on a
Multiline
2. Remove cutout shown in
3. Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest as shown in
the Line
Terminal.
Figure 12-30 Removing the

Figure 12-30 Removing the Cutout

Cord.

Figure 12-31 Bundling the Line Cord

Issue 1.0
Cutout.
Figure 12-31 Bundling
12 - 23