NEC Univerge SV8100 System Hardware Manual page 349

UNIVERGE SV8100/SV8300
System Hardware Manual
3.3.2 Installation
To install a PZ-ME50 on the CD-CP00-US or CC-CP00:
Do not remove or install the CD-CP00-US or
CC-CP00 with the power on.
For installation on the CD-CP00-US blade refer to
CD-CP00-US Blade with Daughter Boards Installed on page
For installation on the CC-CP00 blade, refer to
Blade on page
This daughter board does not have any switches which need to be set and does
not require any hardware setting.
6-25.
Each node in a NetLink network requires the
PZ-ME50.
CD-CP00-US without the PZ-ME50 installed,
supports a single chassis system only (Six
slots only).
CD-CP00-US with the PZ-ME50 is required
to support a system with multiple chassis.
CD-CP00-US without the PZ-ME50 supports
only (One) CD-LTA (8 Digital Station/2SLT)
blade.
Issue 1.0
Figure 6-4
6-15.
Figure 6-6 CC-CP00
6 - 37