NEC Univerge SV8100 System Hardware Manual page 239

UNIVERGE SV8100/SV8300
I
S 3
NSTALLING THE
ECTION
There are two types of chassis, the 19" CHS1U-US chassis and the 19" CHS2U-US
chassis. The CHS1U-US chassis mounts the CC-CP00 blade, PZ-BS10 for the
CHS2U-US chassis expansion, PZ-PW146(1U) Power Supply and Cooling FAN.
The CHS2U-US chassis has six universal blade slots for legacy line / trunk blade
(Single Line Telephone Interface, Digital Multiline Terminal Interface, Central Office
Trunk, ISDN PRI Interface, etc.), In-skin Application Blades (In-skin UMS, In-Skin
Router, etc.). It also houses BUS Interface Blade, Power Supply Unit (PSU) and
Cooling FAN.
The chassis can be wall mounted, floor mounted, stand mounted or rack mounted.
Refer to
proper site preparation. The first part of the this section describes the differing types
of mounting options and the rest of this section describes how to install the chassis.
System Hardware Manual
C
HASSIS
Section 2 Site Preparation and MDF/IDF Construction on page 5-1
Figure 5-1 CHS1U-US Chassis (Front View)
Blade Installed
CC-CP00
Slot for PZ-BS10 blade
– Connection with CHS2U-US chassis
Power Supply Unit (PSU)
Issue 1.0
to ensure
5 - 5