Wall Mounting The Base On A Switch Box; Figure 7-48 Wall Mounting Base On Switch Box; Figure 7-49 Wall Mounted Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
4.10.1.4

Wall Mounting the Base on a Switch Box

1. Locate the screw holes on the base and hang the
cover over the screws on the switch box as
illustrated in
Switch

Figure 7-48 Wall Mounting Base on Switch Box

2. Hang the Multiline Terminal on the base.
Figure 7-48 Wall Mounting Base on
Box.

Figure 7-49 Wall Mounted Multiline Terminal

Because of strength variation in switch boxes, this
method is not recommended.
Issue 1.0
7 - 45