Figure 4-16 Assemble Stand Mount With Screws - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.3
System Hardware Manual
3. Connect the ground wire to all chassis. Refer to
19" Chassis Grounding on page 4-39
grounding the system.
4. Refer to
installation of the chassis or, Chapter 5 paragraph
Installing an Extension or Trunk Blade on page 6-4
installation of blades.
Stand Mounting the 19" Chassis
A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2U STAND KIT(K) and CHS2U
STAND KIT (EXT).
3.3.1 CHS2U-US Chassis Installation
1. Using the supplied screws, assemble the CHS2U STAND
KIT(K) and CHS2U STAND KIT (EXT) (refer to
Assemble Stand Mount with

Figure 4-16 Assemble Stand Mount with Screws

2. Secure the CHS2U-US chassis to the assembled CHS2U
STAND KIT, see
CHS2U STAND KIT with Screws on page
3.5 Installing the 19" Chassis on page 4-27
Screws).
Figure 4-17 Secure CHS2U-US Chassis to
Issue 1.0
3.5.5 Install
for complete details on
to continue
2.2
for
Figure 4-16
Expansion
Plate
4-20.
4 - 19