UNIVERGE SV8100/SV8300
3.2
System Hardware Manual
Floor Mounting the 19" Chassis
The CHS1U-US controlling and the CHS2U-US expansion chassis can be
mounted on the floor using the CHS BASE UNIT and the CHS2U JOINT
BRACKET KIT.
3.2.1
CHS1U-US Chassis Installation
1.
Position the CHS BASE UNIT on desired surface and mark
four holes to be drilled (refer to
2.
Drill the four holes required for floor installation.
3.
Using four screws, secure the CHS BASE UNIT to the floor.
Refer to
screw location.
Figure 5-14 CHS BASE UNIT
Figure 5-15 Secure CHS BASE UNIT with Screws
Figure 5-15 Secure CHS BASE UNIT with Screws
Figure 5-14 CHS BASE
Issue 1.0
UNIT.
for
5 - 17