UNIVERGE SV8100/SV8300
System Hardware Manual
Figure 5-26
Stand Mount Spacing Guide (CHS1U-US+CHS2U-USXN Chassis
Installation)
2.
Mark and drill the two holes required for a floor installation.
It is suggested that plywood first be
installed on the floor where the chassis
will be positioned. This allows for
secure anchoring of the screws which
will be supporting the weight of the
chassis.
For Stand Mounting, up to three
CHS2U-US chassis can stand with a
CHS1U-US chassis.
Issue 1.0
5 - 25