Figure 12-17 Installing Line Card And Plastic Panel On A Multiline Terminal; Figure 12-18 Installing Plastic Panel On A Dth/Dtr Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
S 6 I
ECTION NSTALLING
6.1
System Hardware Manual
L C
INE ARDS AND
Installing the Line Card and Plastic Panel
Line key designations are entered on the line card that is then placed on the
telephone to provide a quick reference of key designations. The line cards
can be changed as necessary. The plastic panel is placed on top of the line
card to hold it in place.
1. Place the line card over the keys on the Multiline Terminal.
When replacing an existing plastic panel or line card refer to paragraph
Removing the Plastic
Line Card

Figure 12-17 Installing Line Card and Plastic Panel on a Multiline Terminal

2. Place the plastic panel over the line card and push the corners of the
plastic panel until they click into place.
Plastic Panel

Figure 12-18 Installing Plastic Panel on a DTH/DTR Multiline Terminal

P P
LASTIC ANELS
Panel.
Issue 1.0
6.2
Multiline Terminal
Multiline Terminal
12 - 15