NEC Univerge SV8100 System Hardware Manual page 235

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Installing the SV8300 Chassis

This chapter contains information to help the technician install the chassis

for the SV8300 system. The technician should be familiar with this section

before installing any equipment.

Pre-installation planning is essential. Advanced planning minimizes

installation time, cost, and disruption of the customer business activities.

System Hardware Manual

REPARATION AND

Precautionary Information

Observe the following warnings during installation.

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

Never touch uninsulated telephone wires or terminals unless the

telephone line is disconnected at the network interface.

Use caution when installing or modifying telephone lines.

To avoid shock or equipment damage, do not plug in or turn the

system power on before completing the installation process.

Avoid working with the equipment during electrical storms.

Use only commercial AC power to prevent shock or fire.

Use the power cord supplied for the chassis.

To prevent overheating, do not bundle AC power cords together.

Make sure the chassis has a proper earth ground.

Install batteries with the correct polarity to prevent damaging

Show Quick Links

Chapters

Table of Contents

Univerge sv8300