Table 6-12 Cc-Cp00 Connections - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
6 - 32
3.2.5 Connectors

Table 6-12 CC-CP00 Connections

CD-CP00-US
6-33 describes the pin-outs for connectors on the CCPU-A. Refer to
Figure 6-6 CC-CP00 Blade on page 6-25
connections on the CCPU-A1 blade.
Connector
CN1
J13
J8
ETERNET
MOH
RELAY
EX IN/EX OUT
RESET
RS1/RS2
The CPU supports the following:
Expansion Chassis
DSPDB Daughter Board (providing 32 channels for the DTMF
Receiver, Call Progress Tone Detection and Caller ID Receivers)
Third-Party CTI/TAPI 2
16VOIPU Blade and 16VOIPDB
T1 Trunks
ACD/inDepth
PRI Trunks
BRI S-Bus/T-Bus
E&M Trunks
Networking
describes each connector on the
Table 6-13 CC-CP00 Connector Pin-Outs on page
,
Table 6-12 CC-CP00 Connections
Connector Description
Backboard connection
VoIPDB blade connection
VMDB blade connection
Ethernet cable connection (for PCPro, SMDR, PMS or
OAI)
Pin jack for external source connection (External MOH)
External source control connection
Unit synchronization connection for the wireless
system
System reset switch
RS-232C port (for PCPro, SMDR, MCI or printer)
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
for the location of the