Issue 1.0
13 - 8
Remove Screw
Figure 13-10 Removing AD(A)-R Unit Cover
3.
Locate the adapter terminals on the unit.
4.
Remove the cap on the adapter terminal to expose the metal
receptacle. Push the cable in the applicable receptacle, and
replace the cap. Line up the slot on the cap with the slot on the
metal receptacle to ensure proper contact. Refer to
13-11 Attaching Cables to the AD(A)-R
Attach the cables to the AD(A)-R Unit according to
AD(A)-R Unit Cable Connections on page
Figure 13-11 Attaching Cables to the AD(A)-R Unit
UNIVERGE SV8100/SV8300
Unit.
term
Installing D
Series i Optional Equipment
Figure
Table 13-1
13-9.