Figure 11-56 Bottom Option Interface Knockout; Figure 11-57 Install Apr-L Unit - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
11 - 78
Knockout

Figure 11-56 Bottom Option Interface Knockout

7. Using the exposed Bottom Option Interface as a guide, install
the APR-L UNIT in the bottom of the DTL/ITL multiline terminal.
Push down until left and right tabs are seated (Refer to
11-57 Install APR-L
Tab
Bottom Option
Interface
8. Return tilt leg to original position.
9. For the APR adapter to be recognized correctly, before
plugging in the keyset, make sure the extension number to be
used for the adapter is undefined in Program 10-03-01.
10. Plug the line cord back into the keyset.
11. Using the ferrite bead that was included with the APR Adapter,
wrap the line cord once through the ferrite bead and snap it
shut (refer to Figure 11-58 Ferrite Bead with APR Adapter on
page 11-79).
UNIVERGE SV8100/SV8300
UNIT).

Figure 11-57 Install APR-L UNIT

Installing SV8100/SV8300 Optional Equipment
Bottom Option
Interface
Figure
Tab