Figure 13-28 Attaching The Hf-R Unit To The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100/SV8300

System Hardware Manual

Installing an HF-R Unit on any DTR/DTH Multiline Terminal (except

With terminal upside down, facing from the bottom of the open

cover, install this unit in terminal adapter Slot 1.

Figure 13-28 Attaching the HF-R Unit to the Multiline Terminal

Plug the tabs marked A and B into adapter slots, then snap the

tab on the other end of the adapter into the receptacle marked

Replace the base plate (or wall mount unit) and attach the line

cord. Refer to

System on page

Figure 13-28 Attaching the HF-R Unit to the

Section 3 Connecting a Multiline Terminal to the

Show Quick Links

Table of Contents

Univerge sv8300