NEC Univerge SV8100 System Hardware Manual page 570

Issue 1.0
8.3
8 - 58
Switch from Handset to Headset
When you are using the handset during a call and want to switch to
the headset:
1. Press the headset Talk Button, and the headset can be used.
2. Place the telephone handset on the Multiline Terminal.
3. When finished, press the Headset Talk Button to end the call.
8.2.6 System Reset
To recover from some faults, system reset may be necessary. To
perform system reset:
1. Press both the Talk Button and Mute Control Button on the
headset for five seconds.
2. When the Talk Indicator blinks release both buttons.
3. Press the Talk Button again.
4. Disconnect the AC Power Adapter from the jack for five
seconds and then plug it back in.
Headsets Used with D
A keyset user can utilize a customer-provided headset in place of the handset.
Like using Handsfree, using the headset frees up the user's hands for other
work. However, Headset Operation provides privacy not available from
handsfree.
The headset plugs into a separate jack on the bottom of the phone. This
allows the use of the handset or headset – whichever is convenient at the
time.
Simply connect the headset into the headset jack located on the bottom of the
keyset. (This jack is located right next to the handset jack, so make sure to
connect to the proper jack.)
term ®
8.3.1 NEC D
The M Series Pin Jack Style headset MX250 allows maximum
versatility for wireless or cordless phones. The MX250 is easy to put
on and can be worn in either ear. This headset includes an
term ®
Telephones
Headset (MX250)
Installing SV8100/SV8300 Cordless Telephones
UNIVERGE SV8100/SV8300