UNIVERGE SV8100/SV8300
System Hardware Manual
4.10.1.2
Wall Mounting the Multiline Terminal
1.
Plug line cord in the wall receptacle. Leave about
eight inches of cord and bundle the rest as shown in
Figure 7-44 Bundling the Line
Figure 7-44 Bundling the Line Cord
2.
Ensure the Tilt Legs are in the flat (unused
position).
3.
Plug the line cord into the Multiline Terminal as
illustrated in
Line In
4.
Align the two holes on the back of the multiline
terminal with the two screws on the wall plate and
slide downward (refer to
Terminal Wall on Wall Plate on page
Cord.
Figure 7-45 Plugging in Line
Figure 7-45 Plugging in Line Cord
Figure 7-46 Mount Multiline
Issue 1.0
Cord.
7-44).
7 - 43