Figure 4-41 19" Expansion Chassis Interface Units - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3.5.4.4 Connect the Controlling and Expansion Chassis
Expansion Chassis Interface Unit
for the Expansion Chassis
PZ-BS11
Expansion Chassis Interface Unit
for the Controlling Chassis
PZ-BS10

Figure 4-41 19" Expansion Chassis Interface Units

1.
2.
Installment of the PZ-BS10 blade and PZ-BS11 blade(s) must be
completed prior to installation of the provided (Cat 5) expansion
cabling.
Ensure Controlling and Expansion chassis are
powered down.
Using the NEC provided CAT5 straight-through
cable(s), attach one end to each Expansion Chassis
CN2 connector on the PZ-BS11 blade (see
4-42 System Expansion Cabling on page
Attach the opposite end to the CN2, CN3 or CN4
connector on the PZ-BS10 of the Controlling
Chassis.
Issue 1.0
Figure
4-38.
4 - 37