NEC Univerge SV8100 System Hardware Manual page 743

UNIVERGE SV8100/SV8300
System Hardware Manual
5. Install the connector plate provided with the ADM as shown in
Figure 13-32 Installing the Connector Plate
The connector plate cannot be used with InMail terminals.
6. Replace the base units as shown in
Multiline Terminal with Base Covers
4.2.2 Wall Mounting ADM and Multiline Terminal
1. Remove both base units.
2. Remove the multiline terminal base Unit cutout shown in
Figure 13-33 Installing Base Units on the Wall on page
3. Install the base units on the wall using the eight screws.
Figure 13-32 Installing the Connector Plate
Issue 1.0
on the next page.
Figure 13-31 ADM and
Removed.
13-32.
13 - 31