Table 6-54 Cd-4Odta Led Indications; Table 6-55 Cd-4Odta Rj-61 Cable Connector Pin-Outs - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
6 - 96
5.7.3 LED Indications
LED indications for the CD-4ODTA are listed in
CD-4ODTA LED
function and LED and Operational status. Refer to
CD-4ODTA Blade on page 6-94
blade.

Table 6-54 CD-4ODTA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.7.4 Connectors
Table 6-55 CD-4ODTA RJ-61 Cable Connector Pin-Outs on page
6-97 shows the pin-outs for the RJ-61 connector. Refer to
6-31 CD-4ODTA Blade on page 6-94
location of the connectors on the ODT blade.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
for an illustration showing the
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
Table 6-54
Figure 6-31
Remarks
Figure