Table 6-46 Cd-4Diopa Maximum Upgrade Capacities; Table 6-47 Cd-4Diopa Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
6 - 86
The CD-4DIOPAprovides:
Four (4DIOPU) DID trunk circuits or four OPX circuits
Two Blade status LEDs

Table 6-46 CD-4DIOPA Maximum Upgrade Capacities

maximum capacities for the CD-4DIOPA blades when they are
upgraded.
Table 6-46 CD-4DIOPA Maximum Upgrade Capacities
19" Chassis
with CPU
5
5.5.2 Installation
The CD-4DIOPA can be installed in any universal slot.
5.5.3 LED Indications
LED indications for the CD-4DIOPA are listed in
CD-4DIOPA LED
function and LED and Operational status. Refer to
CD-4DIOPA Blade on page 6-85
blade.

Table 6-47 CD-4DIOPA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
19" Chassis 19" Chassis
without CPU
6
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
provides the
Networked
x4 Chassis
23 50
Table 6-47
Figure 6-27
Remarks