Figure 5-31 Attach Stand Mount Brackets To Chassis With Screws (Chs1U-Us+Chs2U-Usx3 Configuration) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3.3.2.4 CHS1U-US+CHS2U-USx3 Install Chassis
Using supplied screws, secure the chassis to the assembled
CHS STAND KIT (K). Refer to
Brackets to Chassis with Screws (CHS1U-US+CHS2U-USx3
Configuration)
Figure 5-31
7. Align screw holes in floor mount bracket with pre-drilled holes
in floor.
Figure 5-31 Attach Stand Mount
for screw location.
Attach Stand Mount Brackets to Chassis with
Screws (CHS1U-US+CHS2U-USx3 Configuration)
Issue 1.0
5 - 29