Figure 4-11 Secure Chs Base Unit With Anchor Bolts; Figure 4-12 Install Rubber Feet - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4 - 16
.

Figure 4-11 Secure CHS BASE UNIT with Anchor Bolts

4. Install the five rubber feet to the bottom of the chassis.

Figure 4-12 Install Rubber Feet

5. Position the chassis on top of the CHS BASE UNIT.
6. Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2U JOINT BRACKET KIT.
UNIVERGE SV8100/SV8300
Installing the SV8100 Chassis