NEC Univerge SV8100 System Hardware Manual page 577

UNIVERGE SV8100/SV8300
System Hardware Manual
6. Make sure that you have a computer available that can be used for
management. Connect this PC to the IP Switch using an ethernet cable.
Check that the lamp on the IP Switch indicates that the connection is
established.
7. (For UNIVERGE SV8100 only) Connect a network cable between the
CD-(X)ILPA and the IP Switch.
8. The next step is setting up your IP Addressing structure. Refer to the
NEC SIP DECT Solutions Technician's Guide, IP Addressing.
Issue 1.0
9 - 3