Figure 8-44 Placing The Base Unit On The Posts Of The Wall Plate; Figure 8-45 Plugging The Ac Adapter Into The Ac Wall Outlet - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
8 - 36
5. Plug the other end of the short telephone cord into the modular wall jack
in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push down until it
is firmly seated.

Figure 8-44 Placing the Base Unit on the Posts of the Wall Plate

Because of strength variation in switch boxes, this method is not recommended.
7. Plug the AC adapter into a standard 120 Vac wall outlet.
Do not use an outlet controlled by a wall switch.

Figure 8-45 Plugging the AC Adapter into the AC Wall Outlet

UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Cordless Telephones