Figure 3-5 Connecting The Dlc Using Twisted 2-Pair Cable; Table 3-12 Cable Length Of Terminals; Table 3-13 Cable Length Of Optional Equipment - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
S
S 6
YSTEM
ECTION
6.1
Terminal
DT300 Series/
term
D Series i
DT700 Series
Analog
Telephone (SLT,
G3FAX, etc.)
3 - 18
R
EQUIREMENTS
Cabling
This section provides cabling requirements and specifications for various
equipment used in the SV8300 system.

Figure 3-5 Connecting the DLC Using Twisted 2-Pair Cable

diagram of the chassis connected with each of the multiline terminals and
single line telephones by a separate twisted 1-pair cable or 2-pair cable (only
for Multiline Terminals).
DLC
Figure 3-5 Connecting the DLC Using Twisted 2-Pair Cable
Refer to the following tables for cabling requirements and specifications.

Table 3-12 Cable Length of Terminals

Table 3-13 Cable Length of Optional Equipment

Table 3-12 Cable Length of Terminals
Cable
Kind of Cable
Twisted Pair Cable
LAN Cable (UTP
cable10BASE-T/
100BASE-TX)
Twisted Pair Cable
A S
ND PECIFICATIONS
Twisted 2-Pair Cable
Cable Length between
SV8300 and Terminal
Pair
1-pair 1219 ft (400m) with 22 AWG
1968 ft (600m) with 24 AWG
1968 ft (800m) with 26 AWG
2-pair 328 ft (100m) or less
1-pair 3281 ft (1000m) with 22 AWG
4920 ft (1500m) with 24 AWG
8202 ft (2500m) with 26 AWG
UNIVERGE SV8100/SV8300
provides a
RJ-11
Multiline Terminal
Remarks
–
–
–
–
Loop Resistance:
Maximum
600ohms
(including
telephone set)
SV8300 System Specifications