Figure 7-17 Leading Line Cords On A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
4.2
7 - 22
2. Lead the Line and Handset cables through the applicable grooves.

Figure 7-17 Leading Line Cords on a Multiline Terminal

Applying Power to the DT700 Multiline Terminals
The DT700 terminals support two different methods to power the terminal:
AC-2R/AC-3R
Plug the optional AC-2R/AC-3R AC Adapter input Jack in the terminal
base unit, and plug the 2-prong wall plug of the AC Adapter in a standard
120 Vac wall outlet.
In-Line Power/PoE (Power over Ethernet)
In-Line Power (sometimes called Power Over Ethernet) is a LAN
technology that allows standard 10 Base-T/100 Base-TX data cables to
pass electrical current from a power source to a requesting end device.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100/SV8300
Groove for Line and Handset Cables