UNIVERGE SV8100/SV8300
3.4
System Hardware Manual
Rack Mounting the 19" Chassis
A single or multiple chassis can be rack mounted. Controlling and Expansion
chassis can be racked mounted by stacking them horizontally.
1.
The 19" chassis requires two rack mount brackets per chassis for
mounting. Refer to
Figure 4-22 CHS2U-US Rack Mount Brackets
2.
Line up the Rack Mount Bracket(s) with the pre-drilled holes on each
side of the 19" chassis.
3.
Secure the brackets to the chassis using the supplied screws. Refer to
Figure 4-23 Rack Mount Bracket Installed 19" CHS2U-US on page 4-26
for the 19" chassis.
Figure 4-22 CHS2U-US Rack Mount
Issue 1.0
Brackets.
4 - 25