Table 6-20 Voipdb Led Indications; Table 6-21 Voipdb Led Cn1 Transmit/Receive Data Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
Link 10/100
(LED 1)
LINK 1000
(LED2)
DUPLEX
(LED3)
ACT
(LED4)
LED
1000
M bps
ACT (LED4)
DUPLEX (LED3)
LINK1000 (LED2)
LINK10_100
(LED1)
System Hardware Manual
3.5.4 LED Indications
LED indications for the PZ-32IPLA, PZ-64IPLA and PZ-128IPLA
Daughter Boards are indicated in
Indications. Each LED is listed with its associated function and LED
and Operational status. Refer to
Daughter Boards Installed on page 6-15
Blade on page 6-25
LED
10Base-T/100Base-TX link
speed indicator
1000Base-T link speed
indicator
Duplex Status
Link activity or data
transmission and reception
The following table shows the LED indication when transmitting or
receiving data on CN1.

Table 6-21 VOIPDB LED CN1 Transmit/Receive Data Indications

Auto Negotiation Mode
100Mbps
Half Full
ON ON ON
ON OFF ON
ON OFF OFF
OFF ON ON
for the location of the LEDs on the blades.

Table 6-20 VOIPDB LED Indications

Function LED Status
On Red
On Red
On Yellow
On Green
Link Up
10Mbps
1000
M bps
Half Full
ON ON ON
OFF ON ON
OFF OFF ON
OFF OFF OFF
Table 6-20 VOIPDB LED
Figure 6-4 CD-CP00-US Blade with
or Figure 6-6 CC-CP00
Operation Status
100Base-TX link up
1000Base-T link up
Full duplex operation
Link up completed
Force Mode
100Mbps
Half Full Half
ON ON
OFF ON OFF
OFF OFF OFF
ON ON
Issue 1.0
10Mbps
Full
ON ON
ON
OFF
ON ON
6 - 45