Table 6-29 Cd-4Lca/Cd-8Lca Led Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
System Hardware Manual
If the PZ-4LCA/PZ-8LCE is used, install this prior to inserting the CD-8LCA
into the chassis
4.3.3 LED Indications
LED indications for the CD-4LCA
CD-4LCA/CD-8LCA LED
associated function and LED and Operational status. Refer to
Figure 6-18 CD-4LCA Blade on page 6-56
Blade on page 6-57

Table 6-29 CD-4LCA/CD-8LCA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
CD-8LCA are listed in
/
Indications. Each LED is listed with its
for the location of the LEDs on the blades.
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Issue 1.0
Table 6-29
and Figure 6-19 CD-8LCA
Remarks
6 - 59