NEC Univerge SV8100 System Hardware Manual page 232

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
R
S
6
EMOVE AND
ECTION
If required, the cooling fan installed in the CHS2U-US chassis can be removed and
replaced. The following provides the procedure for the CHS2U-US chassis.
6.1
4 - 64
I
NSTALL
CHS2U-US Chassis
6.1.1
Remove Cooling Fan
To reduce the possibility of electrical shock or
damage to equipment, NEC recommends
powering Off the chassis and disconnecting the
AC cable from the power source before
removing the chassis cover.
1.
Ensure the chassis is powered down.
2.
Loosen retaining screw from chassis access panel.
C
F
OOLING
AN
To reduce the possibility of damage to
equipment, the installer must wear a
grounded wrist strap to protect the
equipment from static electricity.
Figure 4-79 19" Chassis Access Panel
UNIVERGE SV8100/SV8300
Retaining Screw
Installing the SV8100 Chassis

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Univerge sv8300

Table of Contents