Connecting Earth Ground - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide
5. Hook the KSU on the screw heads, and fasten two screws.

Connecting Earth Ground

Important!! In each KSU, connect "ETH" (Earth Ground) lug to the verified Earth Ground point using 14AWG
(Φ2.0mm) wire.
Ensure all Main and Expansion KSU are powered off and unplugged AC cord.
• The grounding cable is supplier-provided.(not supplied with the SL1000 Main KSU.)
1. Loosen the screw
2. Insert a grounding wire (user-supplied).
3. Tighten the screw.
4. Connect the grounding wire to earth.
Proper grounding is very important to protect the System from external noise
and to reduce the risk of electrocution in the event of a lightning strike.
14