UNIVERGE SV8100/SV8300
System Hardware Manual
PSTN
Figure 11-60 PSA-L UNIT Connections
12.5.1
Installing the PSA-L Adapter
Before installing or removing the PSA-L
adapter, remove the line cord, LAN cable, and
then AC adapter from the outlet.
1.
Turn multiline terminal upside down.
2.
Unplug the line cord and handset cord from the keyset.
Only one PSA-L UNIT can be attached to the DTL/ITL multiline
terminal.
3.
Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg Support on page
Issue 1.0
DTMF/DP
Figure 11-61
11-82).
11 - 81