NEC Univerge SV8100 System Hardware Manual page 654

Issue 1.0
11 - 64
3.
Not sure if .Net is installed:
11.7.2 Install Your Application Security Key
VSR Reporter Pro requires an Application Security Key (a USB
dongle which is shipped with the application) to be inserted when the
VSR Reporter Pro is running. This will unlock the application and
prevent unauthorized use. The VSR Reporter Pro will display
messages and halt its processes if the Application Security Key is
not found or if the wrong key is inserted.
1. Insert USB key into an available USB port on PC.
2. Windows should respond with Found New Hardware and
identify the device as a Matrix USB Key.
3. If Windows does not find the needed driver, browse to the CD.
The driver is loaded on the CD in the Drivers folder.
If the Microsoft .Net Framework 1.1 is not installed,
you can download it from the Microsoft web site.
The link to Microsoft .Net Framework download at time
of this writing:http://www.microsoft.com/downloads/
details.aspx?FamilyID=262d25e3-f589-4842-8157-
034d1e7cf3a3&displaylang=en
If you have any doubts, try to install VSR Reporter
Pro 2.0. The installation will halt and inform you if
the Microsoft .Net Framework 1.1 is not found. If
this occurs, you can download the Microsoft .Net
Framework 1.1, install it, restart your computer and
then proceed to install VSR Reporter Pro.
The Application Security Key is associated
with your Software license.
The Application Security Key is
non-transferable and will not be replaced if
lost.
If the key becomes damaged within the
warranty period, you will need to return
your key to support for verification and
replacement if the nature of the damage
qualifies.
Installing SV8100/SV8300 Optional Equipment
UNIVERGE SV8100/SV8300