Figure 12-32 Wall Mounting The Base Plate; Figure 12-33 Installing The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
12 - 24
4. Turn the base cover upside down, feed the line cord through
the cutout and attach the cover to the wall using six screws as
shown in Figure 12-32 Wall Mounting the Base

Figure 12-32 Wall Mounting the Base Plate

5. Install the Multiline Terminal over the four tabs on the base
cover, and push down until it clicks in place.

Figure 12-33 Installing the Multiline Terminal

UNIVERGE SV8100/SV8300
Plate.
term
Installing D Series i Telephones