Description Of Ru-Parameter - KEB COMBIVERT F5 MULTI Applications Manual

Functional Desription

6.1.5 Description of ru-Parameter

ru. 0 Inverter state
Adr.
0200h
In parameter Ñinverter statusì the actual operating condition of the frequency inverter is displayed. In the case of an
error the current error message is displayed, even if the display has already been reset with ENTER (error-LED on the
operator is still blinking). Status messages and information about the cause and removal are to be found in Chapter 9
ÑError Diagnosisì.
ru. 1 Set value display
Adr.
0201h
Display of Set value display. For check reasons the setpoint frequency is also displayed if the control release or the
direction of rotation are not switched. If no direction of rotation is preadjusted then the setpoint frequency for clockwise
rotation (forward) is indicated.
A counter-clockwise rotating field (reverse) is represented by a negative sign. Precondition is the in-phase connection
of the motor.
ru. 2 Ramp output display
Adr.
0202h
The displayed speed corresponds to the rotary field speed output at the ramp output. The representation is the same as
at ru.1.
ru. 3 Actual frequency display
Adr.
0203h
The indicated actual frequency corresponds to the rotary field frequency given out at the inverter output. The representation
is the same as at ru.1.
Chapter Section Page
6 1 6
min max
255
0
!ud.2!
min max
-4000 4000
counter-clockwise
rotation
(reverse)
!ud.2!
min max
-4000 4000
!ud.2!
min max
-400 400
Date Name: Basis
KEB COMBIVERT F5-M / S
12.05.04
Operating and Unit Data
1
-
!ud.2!
0,125
rpm
clowckwise
rotation
(forward)
!ud.2!
0,125 rpm
!ud.2!
0,0125 Hz
© KEB Antriebstechnik, 2002
All Rights reserved
default
0
default
-
default
-
default
-