Parameter Description; Overview Of Parameter Groups; Basic Settings - KEB Combivert F5 Instruction Manual

Parameter Description

3. Parameter Description
3.1

Overview of parameter groups

The operating menu is devided into following parameter groups :
Gruppe Name
Lb Lift basic
Lift drive
Ld
LC Lift encoder
LF Lift Function
LP Lift Posi
LI Lift Info
LA Lift Analog
The adjustment of the parameters must absolutely be made in ascending order, because:
• the operating menu optimizes itself by displaying only the required parameters.
• the lower parameters effect pre-settings for the following parameters.
• otherwise settings can be overwritten otherwise.
In case of doubt the factory settings should be kept.
3.2

Basic settings

Display Name
Lb.00 Parameter group
Lb.01 Password
Lb.02 Customer-specific password
Lb.03 Drive selection
Lb.04 Positioning mode
Lb.05 Setpoint selection
Lb.06 Reset to factory setting
Lb.07 Pretorque on/off
Lb.08 Switching frequency
Lb.10 In-/output configuration
Lb.11 Input function for terminal X2A.15
Lb.12 Input function for terminal X2A.17
Lb.13 Input function for terminal X2A.13
Lb.14 Output function for X2A.24
Lb.15 Output function for X2A.27
Lb.16 Output function for X2A.18
Lb.17 Output function for X2A.19
Lb.18 Brake resistance value
Lb.19 Safety gear release
Lb.00 Display of the current parameter group „Basic"
Lb.01 Password
To protect the lift drive against unauthorized access, a password is to be entered before parameterizing. If no
password has been set with Lb.02, the factory setting „11" is valid.
Input
10...65535
10
11
GB - 22
Function
Basic setting
Entry of the motor data
Adjustment of motor and shaft encoder
Lift-specific adjustments
Adjustment for positioning operation and ogive run
Information, running messages, measured values, error memory
Adjustment of analog in- and outputs
Function
Input of password
Inhibits the programming
Factory setting
Setting range Default setting
BASIC
10...65535
11...65535
0...4
0...4
1...6
0...1
0...1
2, 4, 8, 12, 16
1...2
0...9
0...9
0...9
0...8
0...8
0...8
0...8
0,5...300,0 Ω
0...1
-
11
11
AG
1
1
0
0
16
1
1
5
0
1
2
3
4
30,0 Ω
0