KEB COMBIVERT F5 MULTI Applications Manual page 103

Operating and Unit Data
ru.29 AN2 pre amplifier display
Adr.
021Dh
This parameter shows the value of analog signal AN2 in percent on the differential voltage input (terminal X2A.3 /
X2A.4) before signal amplification. In dependence on an.10 the indicated value of 0...±100 % corresponds to: 0...±10 V;
0...±20†mA or 4...20 mA (also see Chapt. 6.2 ÑAnalog inputsì).
ru.30 AN2 post amplifier display
Adr.
021Eh
This parameter shows the value of the analog signal AN2 in percent after passing the characteristic amplifier. The range
of indication is limited to ±400 % (also see Chapt. 6.2 ÑAnalog inputsì).
ru.31 AN3 pre amplifier display
Adr.
021Fh
This parameter shows the value of analog signal in percent on the optional input AN3 before signal amplification. In
dependence on an.10 the indicated value of 0...±100 % corresponds to: 0...±10 V; 0...±20 mA or 4...±20 mA (also see
Chapt. 6.2 ÑAnalog inputsì).
ru.32 AN3 post amplifier display
Adr.
0220h
This parameter shows the value of the analog signal in percent on the optional input AN3 after passing the characteristic
amplifier. The range of indication is limited to ±400 % (also see Chapt. 6.2 ÑAnalog inputsì).
© KEB Antriebstechnik, 2002
All Rights reserved
min max
-100 100
min max
-400 400
min max
-100 100
min max
-400 400
Name: Basis
KEB COMBIVERT F5-M / S
Functional Desription
%
0,1
%
0,1
%
0,1
%
0,1
Date
12.05.04
default
-
default
-
default
-
default
-
Chapter Section Page
6 1 13
6