KEB COMBIVERT F5 MULTI Applications Manual page 105

Operating and Unit Data
ru.38 Power module temperature
Adr.
0226h
ru.38 shows the actual power module temperature of the inverter.
ru.39 OL counter display
Adr.
0227h
To prevent ÑE.OLì errors caused by too high loads (load reduction), the internal counter content of the OL-counter can be
made visible herewith. At 100 % the inverter switches off with the error ÑE.OLì. The error can be reset only after a cooling
time (blinking display ÑE.nOLì).
ru.40 Power on counter
Adr.
0228h
The operating hours meter 1 displays the time the inverter was switched on. The indicated value includes all operating
phases. On attaining the maximum value (approx. 7.5 years) the display remains on the maximum value.
ru.41 Modulation on counter
Adr.
0229h
The operating hours meter 2 displays the time the inverter was active (motor controlled). On attaining the maximum
value (approx. 7.5 years) the display remains on the maximum value.
ru.42 Modulation grade
Adr.
022Ah
The modulation grade shows the output voltage in percent. 100 % correspond to the input voltage (no-load). At a value
of > 100†% the inverter works with overmodulation.
ru.43 Timer 1 display
Adr.
022Bh
The count of the free-programmable timer 1 is indicated. The display is done either in seconds or hours (see LE.21). The
counter can a adjusted to any chosen value by keyboard or bus. The programming of the counter is done with the
parameters LE.17...LE.21 (also see Chapt. 6.9.4 ÑTimerì).
© KEB Antriebstechnik, 2002
All Rights reserved
min max
0 150
min max
0 100
min max
0 65535
min max
0 65535
min max
0 110
min max
0 655,35
Name: Basis
KEB COMBIVERT F5-M / S
Functional Desription
∞ C
1
%
1
h
1
h
1
%
1
-
0,01
Date
12.05.04
default
-
default
-
default
-
default
-
default
-
default
-
Chapter Section Page
6 1 15
6